Aluminium 6063 Tubes Exporter in India

Aluminium 6063 Tubes are manufactured from Aluminium Alloy 6063, a heat-treatable aluminium-magnesium-silicon alloy known for its excellent extrudability, good corrosion resistance, moderate strength and smooth surface finish. The alloy is designated as UNS A96063 and is widely used for architectural, structural and general engineering tubular applications.

Aluminium 6063 Tubes are available in different outside diameters, wall thicknesses and lengths. Standard as well as customized dimensions can be supplied according to application requirements, manufacturing capabilities and customer specifications.

Kamal Steels can supply Aluminium 6063 Tubes in customized outside diameters, wall thicknesses and lengths according to customer and project requirements.

The theoretical weight of an Aluminium 6063 Tube depends on its outside diameter, inside diameter, wall thickness and length. The following values are approximate reference values calculated using the nominal density of Aluminium 6063.

Note: The values shown are approximate theoretical weights. Actual tube weight may vary according to dimensions, dimensional tolerances, temper and manufacturing conditions.

ASTM B210 Aluminium 6063 Tubes are supplied according to applicable requirements for seamless tubes manufactured from aluminium and aluminium alloys. Aluminium 6063, designated as UNS A96063, is widely selected for applications requiring good corrosion resistance, excellent extrudability and an attractive surface finish.

The required temper, dimensions and mechanical properties should be specified according to the intended application. Aluminium 6063 is commonly supplied in tempers such as O, T5 and T6, depending on the required combination of strength, formability and finishing characteristics.

Aluminium 6063 Tubes are valued for their excellent extrusion characteristics, corrosion resistance, surface finish and moderate strength. These properties make the alloy particularly suitable for architectural and fabricated tubular products.

• Excellent extrudability
• Good corrosion resistance
• Good surface finish
• Good weldability
• Moderate mechanical strength
• Lightweight construction
• Good formability
• Suitable for anodizing and finishing
• Good dimensional consistency for extruded profiles
• Suitable for architectural and engineering applications

Aluminium 6063 is a 6000-series aluminium alloy containing magnesium and silicon as its principal alloying elements. This composition provides a useful balance of strength, corrosion resistance, extrudability and finishing characteristics.

The mechanical properties of Aluminium 6063 Tubes depend on the selected temper and product dimensions. Heat-treated tempers such as T5 and T6 provide higher strength than the annealed condition and are selected when improved mechanical performance is required.

Note: Mechanical properties vary according to temper, dimensions, product form and applicable specification. Certified material test reports should be used to verify the properties of supplied tubes.

Aluminium 6063 is identified through aluminium alloy and UNS designation systems. The following designations are commonly associated with this alloy.

Aluminium grades are selected according to their required strength, corrosion resistance, formability, extrusion characteristics and intended application. Aluminium 6063 is particularly valued for its excellent extrusion performance and surface finish, while other grades may be preferred when higher strength or different material properties are required.

Aluminium 6063 Tubes are widely used where lightweight construction, corrosion resistance, excellent extrudability and good surface finish are important. The alloy is especially suitable for architectural, HVAC, transportation and general engineering applications.

Kamal Steels supplies Aluminium 6063 Tubes to industries requiring lightweight, corrosion-resistant and easily extrudable aluminium tubing solutions. Tubes can be supplied in different sizes, wall thicknesses, lengths and tempers according to customer and project requirements.