Aluminium 5052 Tubes Exporter in India

Aluminium 5052 Tubes are manufactured from a non-heat-treatable aluminium-magnesium alloy known for its excellent corrosion resistance, good formability and moderate strength. The alloy is designated as UNS A95052 and is commonly selected for applications exposed to marine, humid and industrial environments.

Aluminium 5052 Tubes are available in a range of outside diameters, wall thicknesses and lengths. Standard and customized dimensions can be supplied depending on the application, manufacturing requirements and customer specifications.

Kamal Steels can supply Aluminium 5052 Tubes in customized outside diameters, wall thicknesses and lengths according to customer and project requirements.

The theoretical weight of an Aluminium 5052 Tube depends on its outside diameter, inside diameter, wall thickness and length. The following values are approximate reference values based on the nominal density of Aluminium 5052.

Note: The values shown are approximate theoretical weights. Actual weight may vary according to dimensions, tolerances, temper and manufacturing conditions.

ASTM B210 Aluminium 5052 Tubes are supplied according to the applicable requirements for seamless tubes manufactured from aluminium and aluminium alloys. Aluminium 5052, designated as UNS A95052, is commonly selected for applications requiring good formability, corrosion resistance and lightweight construction.

The required temper, dimensions and mechanical properties should be specified according to the intended application. Aluminium 5052 is available in different tempers, including annealed and strain-hardened conditions, allowing the material to be selected according to forming and strength requirements.

Aluminium 5052 Tubes are valued for their balance of corrosion resistance, formability, strength and lightweight construction. The alloy is particularly suitable for fabricated products and systems exposed to moisture and marine environments.

• Excellent corrosion resistance
• Good resistance to marine and humid environments
• Excellent formability
• Good weldability
• Moderate mechanical strength
• Lightweight construction
• Good fatigue resistance
• Good machinability in suitable tempers
• Suitable for fabricated and formed components

Aluminium 5052 is an aluminium-magnesium alloy. Magnesium is the principal alloying element and contributes to the alloy's strength and corrosion resistance. The balanced composition makes Aluminium 5052 suitable for marine, transportation and general engineering applications.

The mechanical properties of Aluminium 5052 depend on the selected temper and product dimensions. Strain-hardened tempers such as H32 and H34 provide higher strength than the annealed O temper while maintaining useful forming characteristics.

Note: Mechanical properties vary with temper, product form, dimensions and applicable specification. Certified material test reports should be used to verify the properties of supplied tubes.

Aluminium 5052 is identified through alloy and UNS designation systems. The following designations are commonly associated with this aluminium alloy.

Aluminium alloys are selected according to their required strength, corrosion resistance, formability, weldability and intended application. Aluminium 5052 is particularly valued for its corrosion resistance and formability, while other aluminium grades may be preferred when higher strength, conductivity or extrusion performance is required.

Aluminium 5052 Tubes are widely used where corrosion resistance, formability and lightweight construction are important. The alloy is particularly suitable for marine, transportation, HVAC and general industrial applications.

Kamal Steels supplies Aluminium 5052 Tubes to industries requiring lightweight, corrosion-resistant and formable aluminium tubing solutions. Tubes can be supplied in different sizes, wall thicknesses, lengths and tempers according to customer and project requirements.